Volume 9 | Issue 1 |

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Vishal Bhardwaj, Shakespeare, Hamlet, Tragedy, Adaptation.etc.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

An industrial load is mostly depending on semiconductor devices; control of that loads is important cause industrial loads sensitive against power system disturbance. Hence, in the distribution system, power quality has most important. Voltage and power quality have more problems due to an increase in the use of nonlinear loads such as microcontrollers, power electronic devices, etc. Thus, it needs to identify that problem and the requirement of compensation. Thus, the solution is a dynamic voltage restorer which identifies voltage sag & compensate that sag fast & accurate. In this paper, the simulation of dynamic voltage restorer (DVR) was made by using an artificial neural network. DVR injects the voltage in the system when voltage sag or swell occurred due to fault. The ANN is trained online by data generated by the uncompensated model. These data should be used as a target for ANN. There are many types of training, here we feed-forward backpropagation, Levenberg- Marquardt training algorithm used. ANN is used as a controller for controlling the DVR (Dynamic Voltage Restorer) through an IGBT gate inverter. For mitigating voltage sag & swell inject voltage by DVR with ANN exactly. Also, another method is Integrated Sliding Mode Control using DVR for compensating voltage sag caused due to three-phase faults. The sag or swell detection method is eliminated by using the DVR-SMC model. Hence, this method increases the dynamic response of the DVR & inject the voltage sag with proper amplitude and phase. The comparison between the ANN-based DVR model and ISMC based DVR model has studied about compensation of voltage sag after a fault occurred. From this, obtain best compensation method.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Dynamic Voltage Restorer, Artificial Neural Network, Power quality, ISMC- Integrate sliding mode control.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Pluronic Lecithin organogel, Telmisartan, Transdermal drug delivery system, Factorial design.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Herpes simplex (more commonly known as herpes) is classified into two types: Herpes simplex Virus Type 1(HSV-1) and Herpes simplex Virus Type 2(HSV-2). HSV-1 usually causes mouth and lip sores (also called cold blisters). HSV-1 may cause genital herpes, but HSV-2 in the vaginal herpes is most common. Hence, discovering an effective compound to combat herpes infections is essential. The aim was to predict possible interactions between Thymidine Kinase (TK) as one of the most important viral elements in intracellular HSV-1 replication and 5 potential phytochemicals from Cinnamomum zeylanicum by using a computational approach. 3-Dimensional Structure of Thymidine Kinase (TK) has been retrieved from the Protein Data Bank, prepared and docked with Rutin, Quercetin , Kaempferol , Isorhamentin and Catechin as ligands with Autodock vina. The highest ligand binding affinity to the targeted protein based on minimal binding energy was calculated. More research was carried out in order to identify the protein active site interacted with the ligands examined and all intermolecular bonds that exist. By showing best related affinity (?9,2 kcal / mol) compared to the other ligands, Rutin was described as the most possible inhibitor of viral activity. Rutin can be considered a promising compound for further evaluation as a potentially efficient antiviral compound against HSV-1.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

HSV-1, Thymidine Kinase,Autodock Vina, antiviral.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The process of drug development is very expensive process due to high costs of R&D and human clinical tests. At present a new approach is being tried to understand how disease and infection are controlled at the molecular and physiological level and to target specific entities based on the knowledge. The drugs discoveries are based on molecular biological targets and improve the therapy for disease, wide ranging dosages of the compounds are introduced to the cell line or animal in order to obtain preliminary efficacy and pharmacokinetic information. The process of drug discovery involves the identification of candidates, synthesis, characterization, screening & assay for therapeutic efficacy. Once a compound has shown its value in these tests, it will begin the process of drug development prior to clinical trials.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Drug discovery: Introduction, history of drug discovery, drug discoveries overview, steps in modern drug discovery, advantages and disadvantages of drugs discovery, conclusion.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

With increased competition to reduce cost, industries are thriving to become more economically efficient. Material handling cost is one of the largest unnecessary cost in production which can be reduced by minor changes in production. There are limited studies related to material handling in apparel industry. This paper focuses on exploring different material handling system used in garment industry and effect of implementation of shopping cart system in one of the garment manufacturing unit.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Shirt Manufacturing, shopping cart system, bin system, apparel industry, shirt, production efficiency

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Soil is one of the most abundant construction materials of the nature used from the base of the structure. Almost all type of construction is built with or upon the soil. The most important part of a road pavement is subgrade soil and its strength. If the sub grade is not enough good the whole structure will face failure such as cracks, then stabilization is normally needed. Sub grade is sometimes replaced with stronger soil material or stabilized so as to improve the strength. Increase in sub grade strength may lead to economy in the structural thicknesses of a pavement. Cement, fly ash, lime, fibers etc. are very commonly used for soil stabilization. The main objective of this experimental study is to improve the properties of the soil by adding bitumen emulsion. In this study, the whole laboratory work revolves around the basic properties of soil and its strength in terms of CBR. Besides the bitumen emulsion, stone dust and brick dust are a kind of solid waste materials that are generated from stone crushing industry and brick kilns respectively which are abundantly available. It is estimated that each crusher unit produce 15%-20% stone dust. Disposal of such wastes poses lots of geo- environmental problems such as landfill disposal problems, health and environmental hazards. The best way to eliminate these problems is to make use of such waste products. Keeping this in view a little crushed stone dust and brick kiln dust are added to provide better soil strength. It is observed that excellent soil strength results by using cationic bitumen emulsion (CMS) with little quantity of the above two waste products used as fillers. The appropriate mixing conditions for the soil with CMS Bitumen emulsion have been first attempted. The main objective of this experimental study is to improve the properties of the gravel soil by adding bitumen emulsion. An attempt has been made to use emulsion for improving the strength of gravel soil expressed in terms of CBR values which may prove to be economical. In this study, the whole laboratory work revolves around the basic properties of soil and its strength in terms of CBR. A little cement added to provide better soil strength. It is observed that excellent soil strength results by using cationic bitumen emulsion (CMS) with little quantity of cement used as filler. The appropriate mixing conditions for gravelly soil with CMS Bitumen emulsion have been first attempted. This is followed by deciding four particular material conditions to show the variation in dry density and CBR value to achieve the best possible strength properties of gravel soil.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Sub grade, CBR, Bitumen,Stabilization, bitumen emulsion, Crushed stone dust, Brick kiln dust

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Poetic, Inhibition,Natural,Dohada,Mango Bride, Rudraksa

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

  License

Creative Commons Attribution 4.0 and The Open Definition