Volume 12 | Issue 5 |

 Abstract

Augmented Reality (AR) and Virtual Reality (VR) technologies have emerged as transformative tools in the e- commerce domain, reshaping customer interactions and redefin- ing the online shopping experience. This comprehensive literature review investigates the multifaceted impact of AR and VR on e-commerce, examining their theoretical foundations, practical implications, and potential for industry-wide transformation. Through an exploration of diverse case studies and academic research, this review elucidates the profound implications of these technologies on various stakeholders within the e-commerce ecosystem. It delves into the evolution of AR/VR technologies, their influence on consumer behavior, competitive dynamics, and the challenges and opportunities they present. This paper serves as a valuable resource for researchers, e-commerce practitioners, and industry stakeholders, providing insights into harnessing the trans-formative potential of AR and VR while addressing associated concerns

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Augmented Reality, Virtual Reality, E- commerce, Customer Experience, Online Shopping, Technology Adoption, Consumer Behavior, Industry Transformation, Literature Review

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Abstract: Libraries have long served as bastions of knowledge, fostering intellectual growth and spiritual development within communities and educational institutions. However, the traditional library model, while rich in resources, often faces inefficiencies in its manual processes and limited accessibility. Explores the imperative need for modernization in libraries, transitioning from traditional to digital formats to better serve users in the contemporary age. The digitalization of libraries not only enhances access to a plethora of resources but also streamlines administrative tasks, thereby improving efficiency. By digitizing cataloguing processes, eliminating manual bookkeeping, and implementing user-friendly interfaces, libraries can facilitate smoother operations and enhance user experiences. This abstract advocates for the adoption of digital technologies to propel libraries into the digital age, ensuring that they remain vital hubs of knowledge dissemination and intellectual growth.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Library Management Project

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In the era of technological advancement, bridging the gap between humans and nature is paramount. This paper presents a novel idea aimed at learning techniques to enhance our understanding of plant life through the innovative use of QR code technology. Using this technology, we can understand much more about that plant and make a proper use of it by which it will be beneficial to human beings. The paper work revolves around the concept of scanning QR codes associated with various plant species to get comprehensive information about them. With the help of QR codes and a user-friendly interface, users can delve into the intricate details of plants, including their uses of components, growth habits, environmental requirements, and medicinal uses.In conclusion, this project serves as a testament to the power of interdisciplinary collaboration and technological innovation in fostering a deeper appreciation for the natural world. By seamlessly merging education with technology, we aim to inspire future generations to explore the wonders of plant life and cultivate a sustainable relationship with our environment. Also we have introduced vacation water system supply which enables trees to get water automatically at certain interval of time. Water treatment plays an important role in maintaining water quality standards, particularly in regions where natural water sources may be susceptible to contamination. This type of treatment is useful for those situations when we can't keep continuous watch on our plants or trees. As it becomes difficult for us to keep time to time watch on the watering status of our plants, we can use such techniques for maintaining the humidity among trees and save it from getting dry. In summary, a well-designed vacation water supply system is essential for ensuring a safe, reliable, and sustainable water supply to meet the diverse needs of travelers and residents alike. By incorporating sound engineering principles, innovative technologies, and environmentally conscious practices, such systems play a vital role in enhancing the overall quality of the vacation experience while safeguarding precious water resources for future generations.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

QR codes, plants, environment, sustainable,contamination

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

There are various applications where sheet metal profiles are widely used due to characteristic of useful weight to strength ratio. These profiles are conventionally manufactured by using roll forming machines and mostly manufactured with uniform cross section along the length. However, now a days there are many applications where it is desired to have sheet metal profiles with variable cross sections along the length. This Paper focuses on the basic steps to design such a sheet metal profile with variable cross section to overcome the problem of manufacturing such profiles with tin smithy means to manufacture by hand tools which is not that much accurate process and also takes more time and consume more other resources. This Paper throws the light on all the basic steps of design like, Selection of Profile and study of profile terminology, Selection of Material, Determination of Geometrical dimensions, Preparation of Drawings by using CAD Software and Finally Finite Element Analysis for getting Safety against predetermined loading

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Finite Element Analysis plants, Geometrical dimensions, sheet metal profiles, loading

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The "Hostel and Mess Addressing Platform" is a comprehensive system designed to streamline the management of hostel accommodations and mess services. With the rapid expansion of educational institutions, the demand for efficient hostel management has significantly increased. This project aims to address the challenges associated with the manual operation of hostels and mess facilities by introducing a digital solution. The platform will offer a user-friendly interface for administrators to manage room allocations, mess subscriptions, and the place locations. It will also provide students with an easy-to-use portal for room bookings, meal plans, and feedback submission. The system is expected to reduce human error, improve data consistency, and facilitate easy record-keeping. By automating these processes, the "Hostel and Mess Addressing Platform" will enhance the overall efficiency of hostel operations and provide a better living and dining experience for student

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Hostel Management ,Mess Services, Accommodation System ,Digital Solution ,Meal Planning

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

A line follower robot is a mobile gadget that can recognize and track lines that are created on the ground. The route is usually predefined and may be seen, e.g., as a black line on a white surface with a highly contrasting hue, or unseen, e.g., as a magnetic field. Thus, this kind of robot ought to detect the line using its infrared beam. (IR) sensors mounted under the apparatus. Subsequently, the information is sent to the CPU via assigned Transition buses. In order to enable the line follower robot to follow the path, the CPU will ascertain the proper commands and transmit them to the driver. TABAR's design and testing were done with the intention of competing in the Tabrize line follower robot competition. It does, however, have a few technical and mechanical problems. This article describes the design, implementation, and testing process of TABAR, a miniature line follower robot developed for the line follower robotics competition. Additionally, studies on mechanical and technological issues and problems have been conducted.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

ARDUINO, infrared sensors, line detection, data sense, robot line detection.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Self-driving autonomous vehicles are like robotic chauffeurs that can safely transport passengers from one location to another without the need for human intervention. They rely on advanced technologies such as sensors and algorithms to perceive their environment and make real-time decisions while navigating roads. Through the integration of artificial intelligence and machine learning algorithms, self-driving cars analyze sensor data in real-time, enabling them to interpret road conditions, identify obstacles, and make split-second decisions to navigate safely. These decisions encompass everything from maintaining proper lane positioning and adjusting speed to responding to traffic signals, pedestrians, and other vehicles. Furthermore, autonomous vehicles are equipped with intricate mapping systems that provide detailed information about roads, intersections, and landmarks, allowing them to plan optimal routes and anticipate upcoming challenges. These maps are constantly updated. They can optimize driving behaviors to enhance fuel efficiency, mitigate emissions, and contribute to more sustainable mobility solutions. Overall, self-driving autonomous vehicles represent a transformative leap forward in the automotive industry, promising a future where transportation is safer, more convenient, and more accessible for people around the world.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Self Driving Vehicle, Autonomous Vehicle, Machine Learning, Obstacle avoidance, Remotely Operational, Sensors, Automotive Safety, Sensor Fusion.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The research utilizes an ultrasonic sensor for mapping object distances around a reference point. Distance measurements plotted against servo motor angles create a two- dimensional map. Arduino IDE transmits data to Processing IDE for plotting. The process detects positional changes, indicating disturbances or new objects. Test distances are calculated using high-level time and sound velocity

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

ultrasonic radar, Arduino, sensor, obstacles, data, position change, simulation, motor

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This paper aims at showing the development of an online Website that displays real time Weather Updates of different places. This Website is developed by using some basic frontend Web Development Technologies i.e. HTML, CSS, JavaScript and using API Technology for showcasing real-time Data. It is designed to meet the growing need for accurate and timely weather information in today's dynamic environment

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Weather Displaying Platform, HTML, CSS, JavaScript, Frontend Project, API Integration

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

On 13 January 2022, at 16:55, of the 18 coaches of the Bikaner- Guwahati Express derailed as one of the traction motors fell off the locomotive, prompting the drivers to apply emergency brakes to the speeding train causing the last two assemblies of the locomotive to derail. Currently there is no system to detect the failure in traction motor arrangement. To avoid such accidents in future we are designing a system that will detect the above problem and give prior warning to the loco pilot. Also this project is Patentable. Large structures can be simulated for welding, which consists of an analytical thermal model combined with a non-linear structural finite element model that uses shell elements. A manufacturing analysis is conducted on the anticipated clamping forces, distortions, and residual stresses for varying clamping circumstances and plate thicknesses. Bolts are frequently used to link steel structures, and when they become loose, the structural integrity of the steel and cause accidents. A bogie, which functions as a modular subassembly of wheels and axles, is a chassis or structure with wheels that is fixed to the train. The initiative also looks into forced vibrations that cause tension, which is studied using simulations. In order to do this, ANSYS, a finite element program, is chosen, and load criteria from EN standards are taken into account. These standards are then thoroughly assessed for overall safety and dependability.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Design and Development of Failure Detection Surveillance System for Traction Motor dropping in Locomotive

  License

Creative Commons Attribution 4.0 and The Open Definition